How to use Hairfree Hair Remover
-
Smooth a thin layer of cream over the hair to be treated. -
Wait 4-5 minutes for cream to disolve hair and treat the root. Scrape off. -
Rinse with towel or wash. Repeat weekly for 30 days until growth stops.
Three easy steps that take less than 10 minutes is all it takes to achieve long-term hair reduction. Hairfree 2-in-1 Hair Removal Cream is a simple wipe-on-wipe-off cream which is kind to the skin and does not cause irritation or burning. Apply the cream every week (or more often if you have
fast growing hair) for 30 days weeks or more until new hair growth has ceased. After each application the active ingredients take approximately 4 – 5 days to neutralise hair roots to reduce further growth. Each time you use Hairfree you’ll notice less and less hair growing back.
How to use Female Facial Hair Remover
-
Smooth a thin layer of cream over the facial hair to be removed. -
Leave the cream on for 4-5 minutes todissolve hair and treat the root. -
Scrape off. Rinse. Repeat every week for 30 days until hair growth ceases.
For permanent hair removal it’s just three easy steps that takes less than 10 minutes to complete. Hairfree Female Facial Hair Remover is a 2-in-1 wipe-on-wipe-off cream which is non-allergenic and formulated for sensitive facial skin. It does not cause irritation or burning. Apply the
cream every week for 30 days or more until new hair growth has ceased. Each time you use the cream the active ingredients take approximately 4 – 7 days to neutralise hair roots to reduce further growth. Each time you apply Hairfree you’ll notice less and less hair growing back.
How to use Male Body Hair Remover
-
Spread a thin layer of cream over body hair. Leave on for 4–5 minutes. -
Carefully scrape off the cream with the spatula using firm downward pressure. -
Rinse well or wipe with warm damp towel. Repeat until hair growth ceases.
Hairfree Male Body Hair Remover & Growth Inhibitor is an easy to use wipe-on-wipe-off cream. Ensure that the area to be treated is free from grease, oil and sweat. Use a make-up remover or skin cleanser if necessary. Apply a thick layer of cream to the area of hair to be removed. If treating a large area do not apply the cream to an area larger than the size of your hand. Leave cream on your skin for 6 minutes. Use a timer.
Using the spatula supplied, scrape off the cream, wiping the cream and hair off the spatula each time. If hair is not fully dissolves leave on for a further two minutes.
Rinse with warm water. Do not leave cream on the skin for more than 10 minutes. Repeat the process until the whole area has been treated. Test a small area first to determine time required to dissolve hair and to check for no adverse reaction. <br>
Apply cream every 4 – 7 days depending on the growth rate of your hair. After each application the active ingredients take approximately 4 – 7 days to neutralise hair roots to reduce further growth.
Each time you use Male Body Hair Removeryou’ll notice less and less hair growing back and your hair will start to get thinner and softer.
How to use Male Beard Hair Remover
-
Smooth a thick layer of cream onto one half of the face. Leave on 4–5 minutes. -
Carefully scrape off the cream with the spatula avoiding contact with eyes. -
Rinse well with warm water and repeat application on other half of the face.
Male Beard Hair Remover is an easy to use wipe-on-wipe-off cream. Clean the face with make-up remover or skin cleanser to remove grease, oil and dirt. Apply a thick layer of cream to one half of the face. Leave cream on face for 6 minutes. Use a timer.
Using the spatula, scrape off the cream starting from top of the cheek to the lower chin. If hair is not fully dissolves leave on for a further two minutes.
Rinse the face with warm water. Do not leave cream on the skin for more
than 10 minutes. Repeat the process with the other half of the face. Test a small area first to determine time required to dissolve hair and to check for no adverse reaction.
Apply cream every three days. After each application the active ingredients take approximately 4 – 7 days to neutralise hair roots to reduce further growth.
Each time you use Male Beard Hair Remover you’ll notice less and less hair growing back and your hair will start to get thinner and softer.
How to use Intimate Hair Remover - Women
-
Trim excess hair around the vagina with scissors. Leave 4–5 mm of hair. Apply cream. Don’t use the cream on highly sensitive membrane areas such as the clitoris, labia, vagina, anal cavity. -
Leave 4-5 minutes while the cream penetrates down the hair shaft to the hair follicles beneath the skin. Use the hair removal scraper blade or warm towel and wipe off the excess product. -
Wash the area with warm soapy water and pat dry with a towel. Continue once a week for the next 30 days until hair growth has reduced in density and visible growth has ceased.
Hairfree Intimate Hair Remover couldn’t be easier to use. Just wipe-on-wipe-off and watch the hair fall away a few minutes later. It then treats the hair roots to start the process of permanent hair reduction. Trim hair around the vagina with scissors before applying the product. Leave 4 – 5 mm of hair growth remaining for the cream to travel to the root. Before use skin and hair should be dry and free from grease.
Squeeze some of the cream on to your finger tips. Wipe a thin layer of the cream onto the area of the skin where you want to stop hair growth. Don’t use the cream on highly sensitive membrane areas such as the clitoris, labia, vagina, anal cavity. Spread the cream on at about the thickness of a credit card.
Do not push into the skin too hard or rub. Wash hands straight away after use. Leave for four to five minutes while the cream penetrates down the
hair shaft to the hair follicles below the surface of the skin. Use the hair removal scraper blade or warm towel and wipe off the excess product. Straight away wash the area with warm soapy water and pat dry with a towel.
If there are any remaining hairs that have not been removed reapply again. We do not advise you to leave cream on skin for more than 8 minutes for each application. Remove any remaining stray hairs by shaving. This will not affect the root neutralising effect of Hairfree. Repeat the process when new, thinner, hair growth shows through.
Continue with regular applications for the next 30 days until hair growth has reduced in density and visible growth has ceased.
To enhance the effectiveness and to soothe the skin apply Hairfree Hair Growth Inhibitor Gel immediately after use.
How to use Intimate Hair Remover - Men
-
Trim excess hair around your penis and blls with scissors. Leave 4–5 mm of hair. Apply cream. Don’t use the cream on highly sensitive membrane areas such as the the head of the penis and anal cavity. -
Leave 4-5 minutes while the cream penetrates down the hair shaft to the hair follicles beneath the skin. Use the hair removal scraper blade or warm towel and wipe off the excess product. -
Wash the area with warm soapy water and pat dry with a towel. Continue once a week for the next 30 days until hair growth has reduced in density and visible growth has ceased.
Hairfree Intimate Hair Remover is an easy to use wipe-on-wipe-off cream. For fast and ultra-smooth results carefully trim excess hair from around the penis and balls with scissors before applying the product. Leave 4 – 5 mm of hair growth remaining for the cream to transmit to the root. Ensure that skin and hair is dry and free from grease.
Dispense a small amount onto fingertip. Smooth a thin layer of the cream onto the area of the skin where hair is growing. Do not apply the cream to sensitive membrane areas such as the head of the penis and anal cavity. The layer of cream used should be about twice the thickness of a credit card.
Do not rub. Wash hands immediately after applying. Leave for 4 – 5 minutes for the cream to penetrate into the hair follicles below the surface
of the skin. Use the scraper blade or warm damp face cloth to wipe off loose hair and excess product. Immediately wash the area with warm soapy water and dry thoroughly.
If some hair has not come away with the first application reapply for a second time. Do not leave cream on skin for more than 8 minutes per session. Any remaining stray hairs can be removed by shaving. This does not affect the root neutralising effect of Hairfree. Repeat when new, thinner, hair growth is visible.
Continue with regular applications for the next 30 days until hair growth has reduced in density and visible growth has ceased.
For increased effectiveness and to soothe the skin apply Hairfree Hair Growth Inhibitor Gel immediately after use.
Tips and tricks
Here are some tips and tricks to help you get awesome results from Hairfree. Follow these simple rules and you’re guaranteed smooth hair-free skin.
- Apply the cream every week (or more often if you have fast growing hair) for 30 days or until new hair growth has reduced to the point where you can no longer see new hair growth.
- The effectiveness of Hairfree can sometimes be reduced if users have greasy skin with a high lipid content. This can act as a barrier preventing the active ingredients from penetrating the skin to neutralise the hair root. We recommend using a non-oily facial cleanser before applying Hairfree to thoroughly de-grease the skin before using Hairfree.
- Scrape off hair in the same sequence as you applied the cream, ie, the first area you apply the cream to should be the first area to be scraped off.
- After rinsing with warm water wipe your face with a cold face cloth. This helps to close up skin pores and hair follicles.
- Do not leave Hairfree on your face Hairfree Hair Remover on your face for more than 10 minutes.
- If hair is coarse and difficult to remove, soak hair with warm water for 3 – 4 minutes using a soft absorbent hand towel. Pat dry and then apply cream.
- After using wait for 30 minutes before applying moisturiser or anti-ageing cream to your skin.
- Shallow penetration of the cream can result in deeper, thicker, darker hairs not being treated effectively because the cream does nor reach the hair root. If you are not getting good results this could be the reason. Try applying the cream twice in one session to help the active ingredients reach the hair root. After the first session wash your face and repeat.
- Do not use soap to wash off the cream.
- If you have thick, dark hair you may need to use a thicker layer of Hairfree than stated in our instructions.
-
Before applying degrease your skin using a non-oily make-up remover or a skin cleanser. This helps to remove dead skin, dirt and oil out of skin pores to ensure the active ingredients can penetrate to the hair root.
-
You may need to apply Hairfree more often than once a week, 2 – 3 times a week for thick androgen-driven hair. You may also need to apply Hairfree 6 to 10 times for hair growth to stop completely.
- Hairfree should be applied when there is a small growth of hair or approximately 1 – 2 mm. Ensure that the skin is dry. Try using a makeup remover to reduce surface grease before applying.
- If there is any discomfort during the session please discontinue. Any remaining hairs can be removed by shaving.
- When the hair is removed it should grow back thinner and slower each time. Eventually after four or five applications hair growth should slow down and stop completely.
- Soothing Aftercare Gel with Growth Inhibitor acts as an additional treatment to improve and intensify the effects. Apply after Hairfree when the hair shaft has been dissolved and the outer root sheaf is clear to allow passage of the active ingredients of Growth Shield Factor 2:0.